Skip to content

Emporia Vue 3 Review 2026: The $100 Energy Monitor That Sees Every Circuit

Emporia Vue 3 Review 2026: The $100 Energy Monitor That Sees Every Circuit
November 22, 2026 ⦁ 10 min read ⦁ By Ethan Reyes ⦁ On Gadgets

The Emporia Vue 3 is an in-panel energy monitor that shows your whole-home usage and up to 16 individual circuits in a phone app, with no subscription, and it starts at 99.99 USD. I have used one with the 16-sensor kit for about a year, and the honest summary is that it is the best-value energy monitor you can buy, while the list title’s “100 dollar” and “every circuit” claims need separating, because the 100 dollar unit sees the whole home and the every-circuit version costs 200.

Let me settle that up front. The Vue 3 comes in three tiers: monitor only with two 200A main sensors for about 99.99 USD, a version with eight 50A branch sensors for about 149.99 USD, and a version with sixteen 50A branch sensors for about 199.99 USD. The 100 dollar model tells you what the house is doing. The 200 dollar model tells you which room and which appliance is doing it. Both are excellent value, but they are different purchases and the honest review covers both.

The Vue 3 installs in your consumer unit with clamp-on sensors, connects over 2.4GHz Wi-Fi or Ethernet, and reports real-time and historical usage with a rated accuracy of plus or minus 2 percent at 24,000 samples per second. Prices below are US retail captured in November 2026.

Advertisement

At a glance

ProductBest forKey specsPrice
Emporia Vue 3 monitor onlyBest whole-home value2 x 200A mains CTs, whole-home usage, no subscriptionAbout 99.99 USD
Emporia Vue 3 with 8 sensorsBest small home8 x 50A branch CTs plus the mainsAbout 149.99 USD
Emporia Vue 3 with 16 sensorsBest circuit-level16 x 50A branch CTs plus the mains, up to 16 circuitsAbout 199.99 USD
Refoss EM16PBest local alternative16 channels, local web UI and MQTTAbout 159.99 USD
Shelly Pro EM-50Best two-circuit local2 channels, DIN rail, local APIAbout 119.99 USD

The Emporia Vue 3 and its kit tiers

1. Emporia Vue 3 monitor only, best whole-home value

The monitor-only kit is the 100 dollar answer to the question most households actually have, which is how much power is the house using right now and what did it use yesterday. You get the Vue 3 hub and two 200A current transformers that clamp onto the mains, and the app shows real-time usage, daily and monthly history, and cost estimates based on your tariff. There is no subscription, and the hub supports solar net metering if you later add panels. The honest limitation is that you cannot see which circuit is responsible, so a spike in the graph is something you investigate by walking around rather than by reading a label.

Pros

  • About 99.99 USD with no subscription
  • Plus or minus 2 percent accuracy at 24,000 samples per second
  • Wi-Fi or Ethernet and solar net metering support

Cons

  • Whole-home only, no per-circuit data
  • One-year warranty is short for the price

Check today’s price on Amazon.

2. Emporia Vue 3 with 8 sensors, best small home

The 8-sensor kit is the sensible middle for a flat or a small house, because it covers the circuits that matter most, usually the kitchen, the HVAC, the water heater, the dryer, the EV charger and a couple of lighting or outlet circuits. You get the same hub and the same app, plus eight 50A clamps, at about 149.99 USD. For a home where the big loads are the only ones worth tracking, this is the sweet spot, and you can add more sensors later if you want to expand.

Pros

  • About 149.99 USD with eight branch circuits
  • Covers the big loads that dominate a bill
  • Expandable, so you can add sensors later

Cons

  • Eight circuits will not cover a large house
  • Adding sensors later means another purchase

Check today’s price on Amazon.

3. Emporia Vue 3 with 16 sensors, best circuit-level

The 16-sensor kit is the version I would buy, and it is the one that earns the “sees every circuit” claim. Sixteen 50A clamps plus the two mains give you a full map of a typical consumer unit, so you can see the kitchen, the HVAC, the water heater, the dryer, the EV charger, the hot tub and the individual lighting and outlet circuits separately. At about 199.99 USD it is the best per-circuit value in the category, and the 24,000 samples per second sampling rate is fast enough to catch appliance on/off events rather than smoothing them out. Owners report the 50A sensors are sensitive down to about 6 watts, which is enough to catch standby loads.

Pros

  • 16 branch circuits plus the mains for about 200 USD
  • Fast sampling catches individual appliance events
  • No subscription and a polished app

Cons

  • 16 clamps take a real install, usually with an electrician
  • No official local API without a community firmware flash

Check today’s price on Amazon.

4. Refoss EM16P, best local alternative

The Refoss EM16P is the alternative to consider if you want 16 channels and local control rather than a cloud app. It has two mains sensors plus 16 branch channels, a local web UI, an open API and MQTT, so it can feed Home Assistant without sending your data to a server. It is rated at plus or minus 1 to 2 percent and costs about 159.99 USD. The trade-offs are a less polished app and a smaller owner community than Emporia’s, so the setup relies more on your own configuration.

Pros

  • 16 channels with a local web UI, open API and MQTT
  • About 159.99 USD, below the 16-sensor Vue 3
  • No cloud dependency for the core monitoring

Cons

  • App and documentation are less polished
  • Smaller owner community than Emporia

Check today’s price on Amazon.

5. Shelly Pro EM-50, best two-circuit local

The Shelly Pro EM-50 is the pick if you only want to meter two loads, typically an EV charger and a heat pump, and you want the data in Home Assistant. It is a DIN-rail, two-channel meter at about 119.99 USD with a local API and MQTT, and it needs no cloud account. Two channels will not give you a whole-house picture, but for targeted monitoring of the biggest loads it is simple, local and reliable.

Pros

  • Local API and MQTT with native Home Assistant support
  • About 119.99 USD for two channels
  • No cloud account required

Cons

  • Only two channels
  • Needs a DIN rail, so it suits a consumer unit or a cupboard install

Check today’s price on Amazon.

How to choose the right Vue 3 kit

Start with the number of circuits you genuinely want to watch, because that decides the kit and the price. Two mains sensors answer “what is the house doing”. Eight branch sensors answer “which of the big loads is responsible”. Sixteen answer “which room, and often which appliance”. For most homes, the 16-sensor kit is the one that stays useful for years, because the questions get more specific over time rather than less.

Then be honest about the installation, because 16 clamps inside a consumer unit is a proper job. The work involves live parts, and a qualified electrician is the safe choice even though a confident DIYer can do it with the supply isolated. If you hire it out, the labour adds to the cost and the 16-sensor kit stops being a 200 dollar purchase, so factor that in before you choose.

Check the panel space and the cable routing, because a consumer unit is often cramped. The 50A clamps need to fit around the individual circuit wires, and in a very full panel you may need an electrician to tidy the wiring before the sensors will fit. Measure twice and look inside the panel before you order the largest kit.

Decide about the cloud. The Vue 3 is cloud-first, which gives a good app and remote access but sends your usage data to Emporia. If that bothers you, the owner community has added Home Assistant support through ESPHome, or you can buy the Refoss EM16P or a Shelly for a genuinely local setup. For most people the cloud is a fair trade for the app, but it is a real decision.

Finally, set the tariff correctly in the app, because the cost graphs are only as good as the rate you enter. If you are on a time-of-use plan, enter the periods, and the app will show cost as well as usage. A monitor without the right tariff tells you kilowatt-hours when you want to know dollars. A hands-on 2026 review at dadshometech.com/reviews/emporia-vue-3-review covers the install, the sensor kit and the accuracy against the Vue 2 if you want a second opinion.

Living with the Vue 3

Label every sensor during the install, because an unlabelled sensor is a waste of a clamp. Switch each circuit on one at a time, watch which sensor reacts, and name it clearly in the app. The half hour you spend here is the difference between a useful tool and a graph you ignore.

Calibrate against your utility meter before you trust the numbers. Note the meter reading, check the Vue’s whole-home total an hour later, and adjust if there is a consistent offset. Most owners find the sensors accurate to within a couple of percent, but a quick check confirms it and catches a clamp fitted the wrong way round.

Look for the always-on baseline first, because that is where the easy money is. A handful of standby loads, an old freezer, a water heater on a long pipe run or a forgotten appliance often accounts for a surprising share of a bill, and they are the cheapest to fix. Once the baseline is understood, look at the big cyclic loads like the HVAC and the water heater.

Set alerts for the things that matter, like a circuit that should be off, a water heater that runs for hours, or a whole-home usage above your norm. An alert is more useful than a graph, because it tells you something is wrong while it can still be fixed, and it turns the monitor from a curiosity into a tool.

Review the data every few months rather than every day. A monitor that gets daily attention becomes a chore, and a quarterly review of the circuit map is enough to catch a change in habits or a failing appliance. For the plugs that sit between the monitor and a single appliance, our guide to the best whole-home energy monitors covers the category, and the best smart plugs with energy monitoring cover the individual devices.

Frequently asked questions

Frequently Asked Questions

6
Is the Emporia Vue 3 really a 100 dollar monitor?

The monitor-only kit with two mains sensors is about 99.99 USD and reports whole-home usage. The per-circuit versions cost more: about 149.99 USD with eight sensors and about 199.99 USD with sixteen, so the “sees every circuit” claim applies to the 200 dollar kit.

How accurate is the Emporia Vue 3?

Emporia rates it at plus or minus 2 percent with 24,000 samples per second, and owners report the 50A branch sensors are sensitive down to about 6 watts. Calibrate against your utility meter before trusting the absolute figures.

Do I need a subscription for the Vue 3?

No. Real-time and historical monitoring, cost estimates and the app are all free. There is no monthly fee, which is one of the main reasons it beats the older subscription-based monitors.

Can I install the Vue 3 myself?

A confident DIYer can, with the supply isolated and the clamps fitted to the correct wires. The work is inside a live consumer unit, so a qualified electrician is the safer choice, and many insurers expect a professional install.

Does the Vue 3 work with solar?

Yes. It supports solar net metering, so if you have panels the app shows production alongside consumption, which makes it a good companion to a balcony or rooftop array.

Is the Vue 3 data private?

The standard setup uses Emporia’s cloud, which means your usage data sits on their servers. If you want the data to stay local, the owner community supports ESPHome, or you can choose the Refoss EM16P or a Shelly for a native local setup.

The bottom line

The Emporia Vue 3 is the best-value energy monitor in 2026, and the 16-sensor kit at about 200 USD is the one to buy if you want per-circuit data. The 24,000 samples per second, the plus or minus 2 percent accuracy, the lack of a subscription and the polished app make it the monitor most households will be happy with for years.

The 100 dollar monitor-only kit is the right buy if you only want whole-home usage and cost, and the 150 dollar 8-sensor kit suits a small home where the big loads are the only ones worth tracking. Just be clear about which tier you are buying, because the title’s “100 dollar” and “every circuit” claims describe two different kits.

If you want local control, the Refoss EM16P gives you 16 channels with MQTT and no cloud at about 160 USD, and the Shelly Pro EM-50 is the simple two-channel option. Whichever you choose, get it installed safely, calibrate it against your meter, label every sensor, and start with the always-on baseline, because that is where most homes find the easiest savings.

Ethan Reyes

Ethan Reyes reviews budget gear at Smart Life Hubs. He stress-tests value picks across the under-$100 to $300 tiers and reports what actually survives a year of daily use, flagging cheap-but-good finds and the 'savings' that are false economies.

Leave a Comment

Your email address will not be published.